carbon arc
英 [ˈkɑːbən ɑːk]
美 [ˈkɑːrbən ɑːrk]
碳弧
双语例句
- Carbon arc gouging capability.
具有碳弧气刨功能。 - Carbon arc air gouging is required for the reverse side of butt weld of the wing plate and the web.
翼板（wingplate）、腹板（web）对接焊缝正面焊接后，反面要求碳弧气刨清根； - Microstructure and Properties of Iron Based Carbon Arc Surfacing Layer Applied Magnetic Field
外加磁场作用下铁基碳弧堆焊层的组织和性能 - It can provide several high performance welding modes, such as constant-voltage submerged arc welding, constant-current submerged arc welding, gas shielded welding and carbon arc air gouging.
它能提供多种高性能的焊接模式，如恒压埋弧焊、恒流埋弧焊、气保焊、碳弧气刨。 - EMEM may replace emery wheel grinding, carbon arc gouging operation in certain applications.
数控电熔爆机床可在某些加工场合取代金刚石砂轮磨削、碳弧气刨加工。 - Textiles& Testing method for colour fastness to light: Carbon arc
GB/T8428-1987纺织品耐光色牢度试验方法：碳弧 - Multi-function include manual arc welding, argon arc welding, carbon arc welding.
功能多，可用于手弧焊、氢弧焊、碳弧气刨。 - Effect of Use of Carbon Arc Lamp ( CAL) on Workers 'Electrocardiogram
碳弧灯使用对工人心电图的影响 - Carbon-coated nickel nanocrystals were prepared by using the carbon arc method.
用直流碳弧法制备出碳包Ni金属纳米晶。 - The C60/ C70, sample was prepared by carbon electric arc method, and its crystal morphology was studied by optical microscopy, SEM and TEM.
采用电弧法制备了C（60）/C（70），并用光学显微镜、扫描电子显微镜和透射电子显微镜对其结晶形貌进行了研究。 - Carbon-coated iron nanoparticles synthesized by DC carbon arc discharge method
直流碳弧法合成碳包铁纳米粒子的研究 - The carbon-coated iron nanoparticles were produced by using DC carbon arc discharge method and characterized by transmission electron microscopy and X-ray diffraction ( XRD).
用直流碳弧法制备碳包铁纳米粒子，通过X射线衍射（XRD）、透射电镜（TEM）等分析手段对粒子的成分、形貌等进行表征； - A kind of iron-base hardfacing alloy for carbon arc welding was developed, which is Cr-B-Ni-W-V poly-elements strengthening alloy system.
采用碳弧堆焊方法成功研制了一种耐磨料磨损铁基堆焊合金，该合金为多元复合强化合金，合金系为Cr-B-Ni-W-V。 - Some techniques of preparing X-ray filter foils including rolling, resistant heating, electron beam gun and carbon arc are studied.
研究了采用轧制、电阻加热、电子枪和C弧等制备X光滤片的方法，采用天平称重、α测厚仪和光学法等测量X光滤片厚度。 - Preparation of carbon foils with carbon arc method
碳弧法制备碳膜 - This paper briefly introduces the work principle and structure of carbon arc air gouging.
介绍了碳弧气刨的工作原理和组成结构。 - This paper determined the hemolytic rates of the two kinds of carbon arc lamp ( CAL) dusts, at the same time, taked quartz dust as a positive control.
对两种碳弧灯粉尘的溶血率进行测定，并以石英粉尘为阳性对照。 - The tensile strength and ultimate rate of elongation not lowered after 2160 hr. aging in an all-weather aging chamber with ultra-violet carbon arc lamps;
在紫外型碳弧灯全气候老化箱中老化2160小时，抗拉强度和极限引伸率不降低； - Preparation of Carbon-coated Iron Carbide Nanocrystals by Using AC Carbon Arc Discharge Method
交流碳弧法合成碳包碳化铁纳米晶 - The accumulated solar UV data, solar UV-spectrum in Guangzhou area, and UV-spectrum of artificial lamp as sunshine carbon arc, UV carbon arc, xenon arc etc were analyzed.
系统分析了太阳近紫外能量累积值与紫外能谱实测结果及实测阳光碳弧、紫外碳弧、氙灯等人工光源紫外能谱分布图； - And it also brings forward the security protection of noise, arc and dust in process of carbon arc air gouging.
并提出了碳弧气刨过程对噪声、弧光以及粉尘的安全防护。 - An Investigation of the Incidence of Pneumoconiosis in Carbon Arc Gouging workers* with an Autopsy Report
炭弧气创作业尘肺发病情况的调查研究&附一例尸检报告 - It was found that impact toughness of weld metal was maximum using carbon arc air gouging, and it was minimum using acid backing.
结果表明，清根方式对焊缝冲击韧度有明显影响，用碳弧气刨清根得到的焊缝冲击韧度最好，而用酸性衬垫得到的焊缝冲击韧度最差。 - A highly effective method for preparation of carbon-coated iron carbide nanocrystals by AC carbon arc discharge was studied, the yield of magnetic micro powder was over 90%.
采用交流碳弧法高效合成碳包碳化铁纳米晶磁性微粉，磁性微粉产率达90%以上。 - Effect of rare earth and alloy clement additions on the wear resistance of layer is tested by carbon arc process with high chromium alloy cast powder block.
采用碳弧堆焊的方法，在高铬合金铸铁粉块中加入稀土及合金元素，探讨其对堆焊层耐磨性的影响。 - Research of Carbon Dioxide Arc Welding Technique and Process of Cast Iron Covered with Magnetic Powder
磁粉层上二氧化碳冷焊铸铁技术及工艺研究 - The microstructure and mechanical properties of welding joints were studied by manual metal arc welding, carbon dioxide arc welding and plasma arc welding.
采用手工电弧焊、二氧化碳气体保护焊、等离子弧焊焊接400MPa级超级钢，并对焊接接头显微组织及力学性能作了分析研究。 - Carbon arc hardfacing with alloy power is a low cost and high efficiency hardfacing method. However, it is difficult to obtain a good shape after hardfacing.
合金粉块碳弧堆焊是一种低成本，高效率的堆焊方法，但存在堆焊层成形不良的问题。
英英释义
noun
- has carbon electrodes
Synonym: carbon arc lamp